Wave II Pumps
Popular medium pressure pump for high volume needs in open filter designs. One of the most popular pumps sold by W Lim. Consider the Wave II High Speed or the Dragon High Speed pump when head pressure is 18 feet or more.
Includes quality Marathon motor, 8 foot cord (at no extra charge) for 115v, 2 inch PVC Pipe Schedule 40 inlet/outlets with disconnect unions. 3-Way discharge positions makes this pump easy to connect plumbing too. 3 Year limited warranty on motor.
There is a lot of increase of steel and copper and the cost has been
raised dramatically.
Item # | Description | GPH/Head | Weight | Max. Amps @115v | Max Watts | Price |
---|---|---|---|---|---|---|
0504 | Wave II 7200 | 5850 GPH / 9.24 ft. head | 31 lbs. | 3.25 Amps | 367W | $933.46 |
0505 | Wave II 8400 | 7140 GPH / 4.0 ft. head | 31 lbs | 3.1 Amps | 406W | $960.41 |
0506 | Wave II 9000 | 7632 gph / 10.39 ft. head | 35 lbs. | 5.87 Amps | 630W | $1,068.46 |
0508EX | Wave II + 11400 | 9120 gph / 13.86 ft. head | 49 lbs. | 7.72 Amps | 888W | $1,600.86 |
-
Specifications
- Used for larger koi ponds and larger aquariums. Good for bead filters and Wave II 1/2HP and Wave II 1HP has bigger PSI.
- UL Certified
- Commercial Duty
- Industrial Marathon Motor custom built for W. Lim Corp.
- Worldwide electrical capability – 115v/230v, 50/60Hz
- TEFC 1425/1725 RPM motor
- 3 year Limited Warranty on the motor
- Salt water stainless shaft
- Salt water resistant (corrosion Epoxy paint added on)
- Wet-end built with stainless steel screws
- Strong glass filled with ABS injection housing
- 3-way discharge positions for less restriction
- Custom designed for whisper quiet operation
- High flow 2″ ports (installing a check valve 18″ below the waterline will give better performance)
- 2 quick disconnect unions (included)
- Pre-wired for 115v, Now with 8 foot industrial power cord at no extra cost
- Emergency thermal protection shut-off
- Custom built 3-phase available (60Hz
NEW Pump Curve build with MARATHON MOTOR
New motor 1.0 HP is very strong 115V is 8.6 amps. We are only using 5.8 amps we need to design a new impeller to give you the largest performance; when you need it. 1/2 HP & 1 HP gives you the best operation, it can operate a bead filter. More pressure than any other pump and both are Energy Efficient. The new Marathon Motor took many years to develop in order to give strongest Pressure and Highest Efficiency.
The 50Hz curve above was tested with the generator below
OLD pump Curve build with Baldor Motor
Open Hours
M-F: 7:00 am - 2:30 pm
S & S: Closed