Dragon Pump Series
Ideally suited for Koi Ponds, Aquaculture, Waterscapes and Aquariums Leaf trap with easy open cam lock lid included! Unions included! ™. 3 year limited warranty on motor. Space clearance between leaf trap and housing are optimized to reduce restriction for the best flow rate.
Split Motor capacitor for more air flow and with bigger fan to keep motor cooler.
Additional swing seal to repel water from the motor.
Enclosed bearing to minimize water damage in case of flooding.
Dragon Series
| Item # | Description | GPH @ Head | Weight | Max. Watts @ 115v | Price |
|---|---|---|---|---|---|
| 0302 | Dragon Series 1/4 HP | 5,940 GPH / 3.40 ft. Head | 51 lbs. | 320 Watts / 2.9 Amps @ 115 Volts | $969.00 |
| 0303 | Dragon Series 1/3 HP | 6,426 GPH / 3.80 ft. Head | 51 lbs | 456 Watts / 4.3 Amps @ 115 Volts | $989.00 |
| 0304 | *NEW MOTOR MORE EFFICIENT* Dragon Series 1/2 HP= 3/4 HP | 7,770 GPH / 4.93 ft. Head | 61 lbs. | 600 Watts / 6.2 Amps @ 115 Volts | $1,039.00 |
Specifications
- Good for Bead Filter and Self Prime Capable
- Industrial Marathon Motor custom built for W.Lim Corp.
- Worldwide electrical capacity 115V/230V, 50/60Hz, single phase
- Maximum flow, medium pressure TEFC 1425/1725 RPM
- True 56 frame motor for cooler running and longer life
- Custom built 3 phase available (60Hz)
- Self-priming capability (installing a 1-way check valve will provide better performance)
- Corrosion resistant epoxy paint
- Buna seal for salt water use
- Wet end built with stainless steel screws
- 3 way discharge position for less restrictions
- PVC pipe Schedule 40 w/ 2 inch unions on 1/6, ,1/3 & 3/4 HP models
- PVC pipe Schedule 40 w/ 2.5 inch unions on 1.0, 1.5, & 2 ½ models
W. Lim Products cares about its customers. We have been maintaining our prices low. Our current pump prices are even LOWER than our 2011 catalog.
If you have a copy of our catalog you can verify that the information is true by looking at page 14.
Dragon Series Max Flow Pumps *NEW Dragon 115V/208V/230V Commercial & Industrial Grade*
| Item # | Description | GPH @ Head | Weight | Max. Watts @ 115v | Price |
|---|---|---|---|---|---|
| 0305 | Dragon Series 1.0 HP (Max Flow) | 9,972 GPH @ 3.46 ft. Head | 75 lbs. | 993 Watts / 8.7 Amps @ 115 Volts | $1119.00 |
| 0306 | Dragon Series 1.5 HP (Max Flow) | 11,364 GPH @ 5.78 ft. Head | 77 lbs | 1256 Watts / 12.6 Amps @ 115 Volts | $1279.00 |
| 0307 | Dragon Series 2.0 HP (Max Flow) | 13,992 GPH @ 10.50 ft. Head | 77 lbs. | 1689 Watts / 18.6 Amps @ 115 Volts | $1339.00 |
Specifications
- Good for Bead Filter and Self Prime Capable
- Industrial Marathon Motor custom built for W.Lim Corp.
- Worldwide electrical capacity 115V/230V, 50/60Hz, single phase
- Maximum flow, medium pressure TEFC 1425/1725 RPM
- True 56 frame motor for cooler running and longer life
- Custom built 3 phase available (60Hz)
- Self-priming capability (installing a 1-way check valve will provide better performance)
- Corrosion resistant epoxy paint
- Buna seal for salt water use
- Wet end built with stainless steel screws
- 3 way discharge position for less restrictions
- PVC pipe Schedule 40 w/ 2 inch unions on 1/6, models
- PVC pipe Schedule 40 w/ 2.5 inch unions on 1.0, 1.5, & 2 models
Note 1.0 , 1.5 & 2 HP Dragon Pumps have 2-1/2 unions for IN and OUT. A 2.5 pipe will give you higher pressure but will slightly decrease the flow. Increasing the pipe to 3 will provide 100% max flow. This will not over amp the motor and will match the performance curve shown.
The 50Hz curve above was tested with the generator below
Open Hours
M-F: 7:00 am - 2:30 pm
S & S: Closed
Phone Number
Fax
