2017

Wave I Pumps

Quality low-pressure pump for open gravity filter operation. Best for low head pressure applications. Consider the Wave II for needs when head pressure is 13 feet or more.

Includes quality Marathon motor, 6 foot cord for 115v, 2 inch. PVC Pipe Schedule 40 inlet/outlets with disconnect unions. 3-Way discharge positions makes this pump easy to connect plumbing too. 3 Year limited warranty on motor.

 

Wave I 1/8, 1/6 and 1/4HP Wave I 1/15HP (Leaf Trap sold separately)

NEW Marathon Motor More Efficient

Item # Description GPH / Head Weight Max. Amps @115V Max Watts Price
★0509 Wave I 1/15 hp U.S Motor Open Drip 1 Year Warranty 2,775 GPH / 5.77 ft. head 16 lbs. 1.37 Amps 160W $309.00
0501 Wave I 1/8 HP 4,488 GPH / 8.66 ft. head 29 lbs 2.34 Amps 262W $489.00
0502 Wave I 1/6 HP 4,392 gph / 8.66 ft. head 29 lbs. 2.23 Amps 256W $499.00
0503 Wave I 1/4 HP 5,976 gph / 9.24 ft. head 29 lbs. 3.23 Amps 371W $519.00

COMPARISON below is Baldor Motor Amp Draw

 

★509
1/15HP

   

05011/8HP

   
0502 1/6HP    
0503 1/4HP    

Old Baldor Motor numbers below

Item # Description GPH/Head Weight Max. Amps @115v Max Watts OLD 2011 PRICE
★0509 Wave I 1/15 hp U.S Motor Open Drip 1 Year Warranty 3,000 GPH / 3.4 ft. head 16 lbs. 1.3 amps 143w $359.00
0501 Wave 1 1/8 hp 3,960 GPH / 3.47 ft. head 29 lbs 2.1 amps 233w $559.00
0502 Wave 1 1/6 hp 4,080 gph / 3.47 ft. head 29 lbs. 2.3 amps 247w $569.00
0503 Wave 1 1/4 hp 6,228 gph / 4.00 ft. head 29 lbs. 3.0 amps 330w $595.00
 

 

 

These prices from our 2011 catalog. Pump prices using Baldor Motor.

W. Lim Products cares about its customers. We have been maintaining our prices low. Our current pump prices are even LOWER than our 2011 catalog.

If you have a copy of our catalog you can verify that the information
true by looking at page 12.

 

Specifications

  • Industrial Marathon Motor custom built for W. Lim Corp.
  • Worldwide electrical capability - 115v/230v, 50/60Hz
  • TEFC 1425/1725 RPM motor
  • 3 year Limited Warranty on the motor
  • Salt water stainless shaft
  • Salt water resistant (corrosion Epoxy paint added on)
  • Wet-end built with stainless steel screws
  • Strong glass filled with ABS injection housing
  • Custom designed for whisper quiet operation
  • High flow 2" ports (installing a check valve 18" below the waterline will give better performance)
  • 2 quick disconnect unions (included)
  • Pre-wired for 115v with 6 foot industrial power cord
  • Emergency thermal protection shut-off
  • Custom built 3-phase available (60Hz)

 

NEW Pupm Curves built with Marathon Motor

 

New motor 1.0 HP is very strong 115V is 8.6 amps. We are only using 5.8 amps we need to design a new impeller to give you the largest performance; when you need it. 1/2 HP & 1 HP gives you the best operation, it can operate a bead filter. More pressure than any other pump and both are Energy Efficient. The new Marathon Motor took many years to develop in order to give strongest Pressure and Highest Efficiency.

OLD Pump Curves built with Baldor Motor